2022 Schulte FX-1800 Rotary Cutter Base
- Year 2022
- Make Schulte
- Model FX-1800 Rotary Cutter
2022 Schulte FX-1800 Rotary Cutter Base
2022 Schulte FX-1800 Rotary Cutter
Features may include:- Our medium duty 15' flex wing, rotary cutter
- A single domed 7 ga continuously welded deck makes this rotary cutter extremely easy to clean, prevents water pooling and rusting and helps shed debris.
- 6.5 ” blade overlap and high blade tip speeds.
- A four gearbox drive line with independent slip clutches. The FX-1800 utilizes heavy-duty and extremely reliable Bondioli gearboxes. The splitter has 1 3/4 ” 20 spline input and output shafts and is rated at 260 HP (194kw). The centre and wing boxes have 1 3/4 ” 20 spine input shafts, 2 3/8 ” down shafts and are rated at 225 HP (168kw)*.
- An 80 degree CV shaft allows for smooth power transmission during tight turns. The CV for 540 rpm is a Category 6 and for 1000 rpm is a category 5 The driveline on the cutter itself employs self adjusting friction clutches to protect your investment and always operate at peak performance. All clutches are located under the main shield for ease of service.
- Spun formed 7gauge stump jumpers (round skid pans) ensure durability and balance.
- Available in 540 or 1000rpm drive.
Engine
Engine Power
Minimum: 50 HP (37kW) | Recommended: 85 HP (63kW)
PTO
PTO Power, Rated Engine Speed
540 or 1000rpm
Drivetrain
Gearbox
Center & Wing Gearbox Rating: 225 HP (168kw) | Drive Size, Centre and Wings: Category 6
Drive System
Drive Size, Main: Cat.5CV (1000rpm),Cat.6 CV (540 rpm)
Suspension
Suspension
Rubber gromett 3 puck system
Wheels & Tires
Tires, Rear Specification
Laminate, Aircraft (5 bolt) 22” size
Operational
Operating Speed
Blade tip: 540 rpm / 1000 rpm | Center: 15980 ft/min (4871m/min) / 15974 ft/min (4869m/min) | Wing: 15459 ft/min (4711m/min) / 15708 ft/min (4788m/min)
Chassis
Deck Thickness
7GA (3/16",4.6mm)
Dimensions
Cutting Width
180 ” (4.57m)
Overall Width
190 ” (4.83m)
Overall Length
202 ” (5.13m)
Transport Width
93” (2.36m) (Singles on wings) 102" (2.59m) (Duals on wings)
Transport Height
84"(2.13m)
Height
Cutting: 1.75"to 16.75" (44.5mm to 425mm)
Ground Clearance
14.75"(42.5mm)
Depth, Maximum
Side Skirt Depth & Thickness: 13.63" (346mm) & 1/4” (6.35mm)
Dimensions
Cutting capacity: 4"(101.6mm) | Blade overlap: 6.5"(165.1mm) | Output Shaft: 2.38"(60.3mm) | Wing Working Range: 25 o down to 87 o up | Wing Floating Range: 25 o down to 30 o up
Weights
Weight
5,600 lbs (2540kg) | Hitch: 1680 lbs (762kg)