2022 Schulte XH-1000 Series 4 Industrial Base
- Year 2022
- Make Schulte
- Model XH-1000 Series 4 Industrial
2022 Schulte XH-1000 Series 4 Industrial
Features may include:- Schulte’s heavy duty 10 foot flex wing, rotary mower
- New, extra heavy duty, high horsepower Bondioli gearboxes with new oil level sight glass and 1-3/4" input shafts and 3” (75mm) output shaft
- New extra heavy duty Bondioli G8 drive lines
- New high-torque wing clutches with high slip release settings ensure better performance in rough cutting
- Single domed, sweep clean deck design eliminates excess weight over competitive double deck designs, eliminates build up of debris and prevents rusting on top side of deck
- Tandem walking axles result in smooth operation over rough surfaces
- Increased frame depth & blade tip speed results in a superior flow of material
- With larger 24" aircraft tires, transport height is increased to 17.5" along with improved performance in wet conditions
- Lower pressure 8" stroke hydraulic phasing cylinders for a level lift
- Low maintenance Constant Velocity Tractor Shaft or Patent Pending 540rpm Equal Angle Hitch available
- Centre suspension reduces stress on tractor drawbar
- 3/8” thick formed deck protection rings prevent blade to deck contact
- Double safety chains with individually replaceable links are standard equipment
- Large high horsepower gearboxes with 1-3/4" input shafts and 2-3/8" output shafts, 260hp divider, 210hp centre & wings
- Higher slip clutch release settings than previous design ensures better performance in rough cutting
- 1/4” thick stump jumpers with patent pending Pentagon Blade Bolt design allows cutter sections to ride over obstructions
Engine
Engine Power
Minimum: 50 HP (45 kW) | Recommended: 75 HP (60 kW)
Drivetrain
Gearbox
Divider gearbox rating: 260 HP (194kW) | Centre/wing gearbox rating: 210 HP (157 kW) / 850 rpm, 15,743 ft/min (4884m/min) / 1002 rpm, 16,022 ft/min (4798m/min)
Operational
Operating Speed
Blade tip: 540 rpm / 1000 rpm | Centre: 848 rpm, 15,493 ft/min (4874m/min) | Wing: 986 rpm, 15,991 ft/min (4722m/min)
Chassis
Deck Thickness
7GA (3/16") (4.6 mm)
Dimensions
Cutting Width
126" (3.20 m)
Overall Width
139" (3.53 m)
Overall Length
192" (4.88 m)
Transport Width
Min: 88" (2.24 m)
Transport Height
88" (2.24 m)
Height
Cutting: 1.5 to 17.5" (38 to 144 mm)
Ground Clearance
17.5" (444mm)(with 24” tire)
Dimensions
Cutting capacity: 4" material (102 mm) | Blade overlap: 6.5" (165mm) | Wing working range: 25 degree down to 90 degree up
Weights
Weight
Approx: 5200 lbs (2364 kg) | Hitch, approx.: 1700 lbs (773 kg)